SS modular operation theatre in Kolhapur

The divider and roof board of Modular Operation Theater can be made out of following material according to client necessity. A) 1.6mm thick EGP steel boards supported by 12mm thick Gypsum. B) Stainless steel SS202 or SS304 boards. C) High-pressure Laminate boards according to EN standard. D) PUF sandwiched board. The Operation room divider will have two free surfaces with a base opening in the middle. The outside dividers of the Modular OT room will be developed with strong blocks with concrete putting. The internal surfaces dividers will be developed with 1.60mm thick EGP steel boards upheld by 12-mm gypsum board (India gypsum make) these boards will have fire protection from BS1142 part 3.The inward surface dividers of Modular Operation Theater will be fixed to the blocks divider with fundamental backings. There will be least conceivable pit/hole in the middle of the strong and steel dividers. The all out distance between within and outside surfaces of the working room will be variable to suit the engineer’s design, however will be adequate for the flush mounting of types of gear. The individual divider boards will be spot welded together at equivalent stretches to deliver equivalent help to the boards. Spot welding will be appropriately granulated to make the surface leveled. All joints will be loaded up with metal filler and sanded flush nearby prepared to get the plastic completion. Divider board’s joints will be imperceptible after the last divider covering is applied. Depression between the inward and external dividers will be left with least block for the conceivable expansion of gear sometime in the not too distant future and to empower administrations, pipes, channels and so on tuberous inside the hole, Wall mounted hardware will be flush mounted and fixed into theatre.Modular OT divider boards plan and development will consider the establishment and backing of all hardware and the arrangement of opening needed for the establishment, without influencing inflexibility and strength. Access boxes will be fitted to the back of all divider mounted gear to empower support to be done from outside the emergency clinic working room. Every one of the sharp edges and corners will be in sweep to stay away from bacterial defilement. The inside surfaces of the clinic activity room dividers will be splashed with water based fluid plastic, divider coating or same, affirmed by the planner to a base dry film thickness of 300 microns. The plastic covering will cover the floor covering, roof framework and door jambs by 25 microns. The plastic covering will cover the floor covering roof framework and door jambs by 25mm to give a nonstop fixed surface. The plastic covering will be non – intelligent and the shading will be as required.